Motorola RD5000, Integrator Manual

Page: 154 / 228

7 - 16 RD5000 RFID Integrator Guide
Program Tag
Click on Program Tag from the RFIDDemo Load Window on page 7-5 or from File->Program Tag , RFID- Program
Tag window appears.
Figure 7-10
Program Tag Window
Reader Program Tag Settings:
•
Reserved: Reserved memory bank access operation
•
EPC: EPC memory bank access operation
•
TID: TID memory bank access operation
•
User: User memory bank access operation
•
User Offset
A16-bit word address at which to start reading/writing. Does not hold good for EPC read as EPC read always
returns contents of the complete memory bank.
•
Length: Number of 16-bit words to read.
•
Data: Tag Write data is provided.
•
Lock:
Click Lock to send the lock command to the tag. If a valid (non zeros) access password is stored in the tag,
then the access password is required to lock the tag.
•
Kill:
Click Kill to permanently kill the tag. To kill a tag, a valid kill code has to be stored in the tag and kill code is
required to kill the tag
•
Read:
Click Read to send the read command to the tag. If the tag is locked with valid (non zeros) access password
stored in the tag, then password access is required to read the reserved memory bank. Other memory banks
can be read without supplying access password.
•
Write button:
Click Write to send the write command to the tag. If the tag is locked with valid (non zeros) access password,
then password access is required to write to the tag.
•
EPC Mask:
If bits of EPC ID are given in this field and Mask bank is selected as 1 i.e EPC, then select record is added for
the tag with EPC ID given in the Mask field with the Select Record Settings given in Tag Access Params
Dialog.
Note: By selecting the read tag in the list box, it automatically comes in the Mask field.