manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 83

83

Links Bar

•

Subnet Mask:

 Specifies the subnet mask of the Router itself. Defaults to the common 

Class C subnet. 

•

DHCP Start Address:

 Specifies the first address in the DHCP address range. You can 

reser ve a sequence of up to 253 IP addresses (including up to 64 IP addresses for 
wireless clients) within a subnet, beginning with the specified address, for dynamic 
assignment. 

•

DHCP End Address:

 Specifies the last address in the DHCP address range. 

•

DHCP Lease:

 Specifies the default length for DHCP leases issued by the Router. Enter 

lease time in dd:hh:mm:ss (days/hours/minutes/seconds) format. 

•

DHCP Server Enable:

 Uncheck this setting if you already have a DHCP ser ver on your 

LAN. This enables the DHCP ser ver in this Router.

Additional IP Subnets

The Additional IP Subnets screen allows you to configure up to seven secondar y subnets 
and their DHCP ranges, by entering IP address/subnet mask pairs:

☛  

Note:

 

You need not use this screen if you have only a single Ethernet IP subnet.

This screen displays seven rows of editable columns. All seven row labels are always visi-
ble, regardless of the number of subnets configured.

•

To add an IP subnet, select one of the rows, and click the 

Edit

 button. 

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands