manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 118

118

Example

You want to configure a 3347-02 Gateway with two SSIDs (see 

“Enable Multiple Wireless 

IDs” on page 136

 for more information) for two VLANs, allowing both access to the Inter-

net. One SSID will be in the same VLAN as the four por ts of the Ethernet Switch, so that 
those two networks can communicate. The second VLAN will be for the other SSID. The 
second VLAN will also be denied access to the 3347NWG-VGx web inter face and telnet 
inter face. This setup might be useful if you have a doctor’s office or a coffee shop, and you 
want to keep your customers separated from the rest of the network.

1.

In the VLANs page, check the Enable checkbox, select VLAN #1 in the VLANs list, 
and click the Edit button.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands