manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 45

45

Home

RADIUS Server authentication

RADIUS ser vers allow external authentication of users by means of a remote authentica-
tion database. The remote authentication database is maintained by a Remote Authentica-
tion Dial-In User Ser vice (RADIUS) ser ver. In conjunction with Wireless User Authentication, 
you can use a RADIUS ser ver database to authenticate users seeking access to the wire-
less ser vices, as well as the authorized user list maintained locally within the Gateway.

If you select

 WPA-802.1x

, the screen expands.

Click the 

Configure RADIUS Server

 button.

The Configure RADIUS Ser ver screen appears.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands