manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 54

54

The screen expands.

Router

 

EDCA Parameters

 (Enhanced Distributed Channel Access) govern wireless data 

from your Gateway to the client; 

Client EDCA Parameters

 govern wireless data from the 

client to your Gateway.

☛  

NOTE:

It is not recommended that you modify these settings without direct knowl-
edge or instructions to do so. Modifying these settings inappropriately could 
seriously degrade network per formance.

•

AIFs

: (Arbitration Inter frame Spacing) the wait time in milliseconds for data frames.

•

cwMin

: (Minimum Contention Window) upper limit in milliseconds of the range for deter-

mining initial random backoff. The value you choose must be lower than cwMax.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands