manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 332

332

twisted pair. 

Cable consisting of two copper strands twisted 

around each other. The twisting provides protection against 
electromagnetic inter ference. 

-----U-----

UTP. 

Unshielded twisted pair cable. 

-----V-----

VJ. 

Van Jacobson. Abbreviation for a compression standard 

documented in RFC 1144. 

-----W-----

WAN. 

Wide Area Network. Private network facilities, usually 

offered by public telephone companies but increasingly avail-
able from alternative access providers (sometimes called Com-
petitive Access Providers, or CAPs), that link business network 
nodes.

WWW. 

World Wide Web. 

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands