manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 144

144

Link: 

Status

When you click the 

Status

 link, the Links Bar expands to display nine statistical sub-head-

ings.

These screens will var y depending on your Gateway’s model and traffic 
activity:

•

“DSL” on page 144

•

“ATM” on page 145

•

“Ethernet” on page 145

•

“IP” on page 145

•

“LAN” on page 146

•

“USB” on page 147

•

“Wireless” on page 146

•

“Logs” on page 147

•

“User List” on page 148

DSL

When you click 

DSL

, the DSL Statistics page appears.

The DSL Statistics page displays information about the Router's WAN connection to the 
Internet. 

•

Line State:

 May be Up (connected) or Down (disconnected). 

•

Modulation:

 Method of regulating the DSL signal. DMT (Discrete MultiTone) allows con-

nections to work better when cer tain radio transmitters are present. 

•

Data Path:

 Type of path used by the device's processor. 

Downstream and Upstream statistics

•

Max Allowed Speed (kbps):

 Your maximum speeds for downloading (receiving) and 

uploading (sending) data on the DSL line, in kilobits per second. 

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands