manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 181

181

SHELL Commands

show log

Displays blocks of information from the Motorola Netopia® Gateway diagnostic log. To see 
the entire log, you can repeat the 

show log

 command or you can enter 

show log 

all.

show memory [all]

Displays memor y usage information for your Motorola Netopia® Gateway. If you include 
the optional 

all

 

argument, your Motorola Netopia® Gateway will display a more detailed 

set of memor y statistics.

show pppoe

Displays status information for each PPPoE socket, such as the socket state, ser vice 
names, and host ID values.

show rtsp

Displays RTSP ALG session activity data.

show security-log

Displays blocks of information from the Motorola Netopia® Gateway security log.

show status

Displays the current status of a Motorola Netopia® Gateway, the device's hardware and 
software revision levels, a summar y of errors encountered, and the length of time the 
Motorola Netopia® Gateway has been running since it was last restar ted. Identical to the 

status

 command.

show summary

Displays a summar y of WAN, LAN, and Gateway information.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands