manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 146

146

IP interfaces

•

Address:

 Your Router's IP address as seen from your internal network (LAN), and from 

the public Internet (WAN) 

•

Netmask:

 The subnet mask for the respective IP inter faces (LAN and WAN) 

•

Name:

 The name of each IP inter face (example:Eth0, WAN2) 

Network Routing Table and Host Routing Table

The Routing tables display all of the IP routes currently known to your Router.

LAN

When you click 

LAN

, the LAN Statistics page appears.

The LAN Statistics page displays detailed information about your LAN IP configuration and 
names and IP addresses of devices on your LAN. 

•

Router IP Address:

 The IP address of your Router as seen from the LAN 

•

DHCP Netmask:

 Subnet mask of your LAN 

•

DHCP Start Address:

 First IP address in the range being ser ved to your LAN by the 

Router's DHCP ser ver 

•

DHCP End Address:

 Last IP address in the range being ser ved to your LAN by the 

Router's DHCP ser ver 

•

DHCP Server Status:

 May be On or Off 

•

DNS Server:

 The IP address of the default DNS ser ver 

Devices on LAN

Displays the IP Address, MAC (hardware) Address, and network Name for each device on 
your LAN connected to the Router. 

Wireless

(supported models only)

When you click 

Wireless

, the Wireless Statistics page appears.

The Wireless Statistics page:

•

displays your Router's unique hardware Wireless (MAC) address.

•

displays detailed statistics about your Wireless LAN data traffic, upstream and down-
stream.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands