manualshive.com logo in svg

Motorola Netopia 2200, User Manual

Share
Download
Motorola Netopia 2200 User Manual Download Page 114

114

•

When you enable an inter face, the 

Tag

, 

Priority

, and 

Promote

 checkboxes and an 

802.1p Priority Bit

 pull-down menu appear for that inter face.

Tag

 – Packets transmitted from this por t through this VLAN must be tagged with the 

VLAN VID. Packets received through this por t destined for this VLAN must be tagged 
with the VLAN VID by the source. The Tag option is only available on 

Global

 type por ts.

Priority

 – Use any 802.1p priority bits in the VLAN header to prioritize packets within 

the Gateway’s internal queues, according to DiffSer v priority mapping rules.

Promote

 – Write any 802.1p priority bits into the IP-TOS header bit field for received IP 

packets on this por t destined for this VLAN. Write any IP-TOS priority bits into the 
802.1p priority bit field for tagged IP packets transmitted from this por t for this VLAN. 

All mappings between Ethernet 802.1p and IP-TOS are made according to a pre-defined 
QoS mapping policy. The pre-defined mapping can now be set in the CLI. See 

“Queue 

Configuration” on page 231

.

802.1p Priority Bit

 – If you set this field to a value greater than 0, all packets received 

on this por t with unmarked priority bits (pbits) will be re-marked to this priority. If the 
por t 802.1p PBit is greater than 0, the VLAN 802.1p PBit setting is ignored.

Summary of Contents for Netopia 2200
































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands