Motorola Netopia 2200, User Manual

Page: 278 / 351

278
set wireless mode { both-b-and-g | b-only | g-only }
Specifies the wireless operating mode for connecting wireless clients: both-b-and-g , b-
only
, or
g-only
, and locks the Gateway in that mode.
☛
NOTE:
If you choose to limit the operating mode to B or G only, clients using the
mode you excluded will not be able to connect.
set wireless multi-ssid option { on | off }
Enables or disables the multi-ssid feature which allows you to add additional network
identifiers (SSIDs or Network Names ) for your wireless network. When enabled, you can
specify up to three additional SSIDs with separate privacy settings for each. See below.
set wireless multi-ssid {second-ssid | third-ssid | fourth-ssid } name
Specifies a descriptive name for each SSID. when multi-ssid option is set to on.
set wireless multi-ssid second-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
set wireless multi-ssid third-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
set wireless multi-ssid fourth-ssid-privacy { off | WEP | WPA-PSK |
WPA-802.1x }
Specifies the type of privacy enabled on multiple SSIDs when multi-ssid option is set to
on
. off = no privacy; WEP = WEP encr yption; WPA-PSK = Wireless Protected Access/Pre-
Shared Key; WPA-802.1x = Wireless Protected Access/802.1x authentication. See “Wire-
less Privacy Settings” on page 284 for more information.
☛
NOTE:
WEP is suppor ted on only one SSID at a time, and will not be available if
another SSID already has it configured.