Motorola MTP3150 Feature User Manual Download

Page: 83 / 144

4.6.2.3

Setting Keylock on Startup

Procedure:

From the home screen, press the

Menu

key.

Select

Security

→

Keylock Setup

→

Start Locked

Select

Off

4.6.3

Air Encryption

NOTICE:

This is a Software Selling Feature.

This menu item allows you only to view air encryption state.

Air Encryption is a feature that enables encryption of entire communication between the radio and
infrastructure, which results in increased security of calls, messages, and data.

If configured by your service provider, the radio plays a sound and displays

Call & Data Not

Encrypted

when encryption is on and you receive a clear call (unencrypted). This feature provides

service confidentiality between you and the system.

In the TMO Mode, when Air Encryption is enabled on your radio but cannot be supported due to an

infrastructure failure, the following icon appears on the display: . When encryption is not available in

the DMO Mode, the radio displays: .

4.6.3.1

Viewing Air Encryption State

Procedure:

From the home screen, press the

Menu

key.

Select

Security

→

AirEncrypt

Your radio displays:

•

Air Encryption Is Off

– The Air Encryption is not activated.

•

Air Encryption Is On

– The Air Encryption is activated.

4.6.3.2

Deleting User Keys

IMPORTANT:

The key deletion takes up to 30 seconds.

Prerequisites:

Ensure that the user key deletion is enabled in the codeplug.

Procedure:

Press

→

Encryption and/or Authentication keys are deleted. The radio enters Temporary Disable state and the
service provider must manually restore it.

68015000797-EH

Chapter 4: Main Menu

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands