Motorola MTP3150 Feature User Manual Download

Page: 141 / 144

Message

Message Description

This group already exists

The group you are attempting to add exists in the

Groups

folder.

Individual Calls Only

You can make only individual (private) calls.

Insufficient visible data

Your radio is in the process of determining your location.
This process may take several minutes to complete.

Insufficient visible satel-
lites

Your radio is in the process of determining your location.
This process may take several minutes to complete.

Invalid ID

The entered number is not valid.

Invalid Shortcut Position

The entered number is not valid.

Limited Service

Emergency Calls, Emergency Alarms, and mobility opera-
tions (for example, group attachment) are allowed. All oth-
er incoming and outgoing call and data services are
blocked.

List Empty

There are no programmed entries in the scrolling list. Type
the entry.

List Not Attached

All talkgroups in the scan list are not attached.

List Partially Attached

The scan list is active, but not all talkgroups are attached
to it.

Message Delivered

Indicates mail successfully delivered.

Message Failed

Indicates mail delivery failure.

New Delivery Status

You have received a new Delivery Status.

No Service

Your radio is outside coverage. Return to coverage.

Not allowed in repeater
mode

The service or feature is not available in the Repeater
Mode..

My Groups

Is Empty

You cannot view/delete groups when the

My Groups

fold-

er is empty.

My Groups

Is Full

You are not allowed to add a group to the

My Groups

fold-

er as it already contains the maximum allowed number of
groups.

Network Trouble

Network problems. Please try again later.

No Answer

The called party does not answer.

No Entries

This message is displayed when accessing an empty list.

No Group

• Attachment failed. Your radio detached from current

talkgroup. Please wait until it attaches again to the cur-
rent talkgroup.

• Displayed when you are out of the normal coverage

area of your selected talkgroup. Please select a new
talkgroup that is valid for your working location.

• Indicates a favorite group was removed from the

Groups

folder.

No List

The network list is empty.

68015000797-EH

Appendix C: Troubleshooting

141

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands