Motorola MTP3150 Feature User Manual Download

Page: 33 / 144

Icon

Description

• Solid – when the radio has detected the repeater (for example, when the radio

receives a presence signal).

• Blinking – when the radio has not detected the repeater or during attachment.

• No icon – during a radio-to-radio and gateway communication.

General Icons

All Tones Off – Indicates that:

• Volume is set to 0 (when

Volume Adj. Mode

is set to

Common

• Both simplex and duplex ring volume is set to 0 (when

Volume Adj. Mode

is set

Individual

Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.

Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.

Low Audio – Indicates that the audio mode is changed to low.

High Audio – Indicates that the audio mode is changed to high.

Earpiece Connected – Indicates that the earpiece is connected.

GNSS

• Solid – the radio has a location fix.

• Blinking – the radio is acquiring a location fix. This feature is an optional setting

and may not be enabled on your radio.

Battery Strength – Shows the charge of your battery.

Battery Charging – Indicates that the battery is charging.

Emergency – Indicates that the radio is in Emergency Operation.

• Solid – Emergency Operations initiated.

• Blinking – the radio is in emergency receiving state.

Disaster Alert Call – Indicates that the radio is in Disaster Alert Call.

New Message Has Arrived – Indicates that a new message has arrived.

New Message in Inbox – Indicates that you have unread messages in your

Inbox

Unread (New) WAP Message – Indicates that new page was loaded to the browser.

Call-Out – Indicates Call-Out alert.

Call-Out Alert Arrived – Indicates a receipt of a new Call-Out message.

68015000797-EH

Chapter 2: Getting Started

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands