Motorola MTP3150 Feature User Manual Download

Page: 46 / 144

3.1.8

Phone and PABX Calls

Phone Calls allow you to call a landline telephone number or a cellular mobile phone number. Private
Automatic Branch Exchange (PABX) Calls allow you to call local (office) extension numbers.

NOTICE:

This feature is available only in Trunked Mode Operation (TMO).

The Phone/PABX Speed Dial feature allows you to dial a shortened number of up to three digits
instead of the full number. The Phone/PABX

Speed #

number is assigned when the dialed number is

added in the contact list.

3.1.9

Assistance Call

This feature allows you make a private call to ask for assistance during normal and non-critical
situations.

NOTICE:

Your service provider can configure the number, priority, and the type of the call

(simplex or duplex).

3.1.10

Call Modification

Call Modification is a feature that allows your service provider to modify the call to optimize it and
adjust to a current situation.

Modification can cover:

Call priority

Modified during call setup.

Call type

Modified during call setup.

Call encryption

Modified during an ongoing call, but not in the transmission phase.

When the call is modified, your radio displays

Call Modified

message.

When a recently modified call requires the

PTT

button to transmit, your radio displays

Call

Modified

Use PTT

All modifications are made by your service provider and your radio only follows them. You have no
influence on ongoing call modifications.

When call priority is changed to emergency:

• The display indicates that an Emergency Group Call has been received.

• Your radio plays a special audio alert.

NOTICE:

If a Group Call is modified into an Emergency Group Call, no emergency-related

features are triggered.

If your radio cannot follow a call modification requested by the service provider, due to its settings, your
radio rejects it and displays

Service Not Available

message.

68015000797-EH
Chapter 3: Modes

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands