Motorola MTP3150 Feature User Manual Download

Page: 42 / 144

Chapter 3

Modes

This chapter contains information on available modes that the radio can operate in.

3.1

Trunked Mode Operation

Trunked Mode Operation (TMO) requires the switching and management infrastructure.

TMO enables various voice and data communication types. Examples are group calls and short data
service messages. TMO also enables access to features related to infrastructure such as packet data.

Figure 4: Trunked Mode Operation

3.1.1

Entering TMO Mode

Procedure:

Perform one of the following actions:

• From the home screen, press

Options

• From the home screen, press the

Menu

key. Select

Networks

Select

Trunked Mode

3.1.2

Making Group Calls in TMO

The Group Call is received by all members of the selected group who have their units turned on and
are connected through the network.

Procedure:

Press and hold the

PTT

button.

68015000797-EH
Chapter 3: Modes

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands