Motorola MTP3150 Feature User Manual Download

Page: 78 / 144

4.3.12

Call-Out Availability

NOTICE:

This feature is only available when enabled by your service provider.

This menu item enables or disables the Call-Out availability.

4.3.12.1

Setting Call-Out Availability

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

Call-Out Availability

Select one of the following options:

•

Available

•

Not available

4.4

Contacts

This menu stores all your contact numbers.

Each contact entry requires the following information:

Name

If you store more than one number to one contact, this entry is required.

Type

Each contact must be assigned to one of the following types:

Table 20: Contact Types

Contact Icon

Description

Private

Cannot have a speed dial number.

Mobile

Home

Work

PABX

Other

Pickers

Indicate more than one number in a contact.

# (number)

Each contact entry must contain a number.

68015000797-EH
Chapter 4: Main Menu

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands

Motorola MTP3150, Feature User Manual

Search results

Summary of Contents for MTP3150

Reviews:

Related manuals for MTP3150

Brands by name

Popular brands