Motorola MTP3150 Feature User Manual Download Page 136

Page: 136 / 144

- Low – icon is displayed with the New WAP Message tone.

- Delete – available only if you are in WAP Box, the text

WAP Message deleted remotely

displayed, otherwise there is no indication.

NOTICE:

Animation is not displayed if you are in a call, or in Emergency Mode, or in Call

Out, or in message editor, or PIN lock state, or switching to DMO.

• Load Push Message

- High – browser opens to the user with the New WAP Message tone.

- Low – the icon is displayed with the New WAP Message tone.

NOTICE:

The browser does not open if you are in a call, in Emergency Mode, in Call Out, in

message editor, in PIN lock state, or when switching to DMO.

5.14.16.2

Viewing WAP Messages

Procedure:

From the home screen, press the

Menu

key.

Select

Messages

→

WAP Box

Select the required message.

Select

Go to

to view the message in the browser.

68015000797-EH
Chapter 5: Features

136

Summary of Contents for MTP3150
















































































































































Search results

Summary of Contents for MTP3150

Reviews:

Motorola MTP3150, Feature User Manual, Page: 136 / 144

Search results

Summary of Contents for MTP3150

Reviews: