2
Wait for the
Talk Permit
tone (if configured) and then speak into the microphone. Release the
PTT
button to listen.
3.1.3
Receiving Group Calls in Idle
Procedure:
1
Your radio receives a Group Call.
NOTICE:
The incoming Group Call is signaled by a
Receiving Group Call
tone.
2
To respond, press and hold the
PTT
button.
3.1.4
Receiving Group Calls during Ongoing Group Calls
While in active Group Call, your radio receives a Group Call with a higher priority.
One of the following occurs:
• Your radio is forced to end the current group call and automatically join the incoming one.
• Your radio displays incoming group call screen with options:
-
Join
– ends current Group Call and starts the incoming one.
-
End
– cancels the incoming Group Call.
3.1.5
D-PTT Preempt Group Call
NOTICE:
This is a Software Selling Feature.
The D-PTT Preempt Group Call allows superiors to take over and speak in an ongoing group call by
making preemptive priority calls.
NOTICE:
Your radio can only support either the D-PTT Tone feature or D-PTT Preempt Group
Call feature at a time.
By pressing the PTT (Push-To-Talk) button twice, you make a preemptive request to temporarily
interrupt an ongoing group call and gain permission to speak.
If your group call is preempted and you are still pressing the
PTT
button, your radio displays the
PTT
Denied
prompt.
If your service provider enables the visual notification, your radio displays the
PTT Interrupted
prompt throughout the group call preemption, even if you no longer hold the
PTT
button.
If your service provider enables the audio notification, your radio plays the PTT Denied Tone until you
no longer hold the
PTT
button.
68015000797-EH
Chapter 3: Modes
43
