Motorola MK1200 Product Reference Manual Download

Page: 73 / 232

Chapter 4 Remote Device Manager

The Symbol Remote Device Manager (RDM) 2.5 is a simple, menu-based Windows

utility for streamlining large

and small site deployments. This utility allows a user to remotely stage (discover and configure) and monitor
networked MK1200s.

The RDM functionality falls into five categories:

•

Generating a device configuration file

•

Performing discovery (detection) of devices on a network

•

Enabling automated staging/configuring/provisioning of networked devices

•

Remote monitoring

•

Remotely initiating device functionality.

Generating Configuration Files

Use the

Create Local Configuration File

feature of RDM to create an MK1200 configuration file (

mkconfig.reg

When loaded onto the device, this file customizes the MK1200 communication settings, application settings, date
and time setup, and much more.

After generating the mkconfig.reg file, load it into the MK1200

Application

folder (

Desktop > My Computer >

Application

) and reboot the device. The MK1200 reads the mkconfig.reg file upon power-up and configures its

parameters according to the settings defined in the mkconfig.reg file. If the MK1200 loses power, the parameters
set within the configuration file persist and are re-established at the next power up.

See

Creating a Configuration File on page 4-11

for more information.

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands