Motorola MK1200 Product Reference Manual Download

Page: 15 / 232

About This Guide

Introduction

The

MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

provides information on installing, operating,

and programming the MK1200.

Chapter Descriptions

Following are brief descriptions of each chapter in this guide.

•

Chapter 1, MK1200 Introduction

provides an overview of the MK1200 that includes parts of the MK1200,

features, and scanning modes.

•

Chapter 2, Installation

describes the hardware setup and installation of the MK1200.

•

Chapter 3, Configuration

describes the configuration parameters of the MK1200.

•

Chapter 4, Remote Device Manager

, provides information about the Remote Device Manager (RDM).

•

Chapter 5, Transferring Files to the MK1200

, describes how to use Microsoft

ActiveSync for communication

between the MK1200 and a host computer.

•

Chapter 6, Web Kiosk Software Suite

describes the free browser-based sample application available for

download.

•

Chapter 7, System Features

describes the wide range of capabilities used to support independent

application development on the MK1200.

•

Chapter 8, Software Development Environments

, describes the software development environments.

•

Appendix A, Technical Specifications

, provides technical information about the MK1200.

•

Appendix B, RF Network Configuration

describes how to configure the Spectrum24 wireless connection.

•

Appendix C, Rapid Deployment Client

, describes the Rapid Deployment Client and how it facilitates software

downloads to the MK1200 from a Mobility Services Platform (MSP) Console’s FTP server.

NOTE

Unless otherwise noted, the term MK1200 refers to all configurations of the device.

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands