Motorola MK1200, Product Reference Manual

Page: 36 / 232

2 - 6 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Pole Mounting
The Pole Mounting Kit accommodates poles up to 11.5 inches in diameter. To install the MK1200 using the Pole
Mounting Kit:
1.
Wrap the pole mount straps around the pole and tighten.
2.
Secure the connector port cover to the pole mount bracket using the four shoulder screws.
3.
Connect the cables to the MK1200 (see Figure 2-3 on page 2-5 ) and ensure the cables are routed and secured
correctly (see Figure 2-4 on page 2-5 ). Cables incorrectly mounted or secured can become pinched when the
MK1200 is attached to the Connector/Port Cover.
4.
Position the MK1200 keyholes located on the back housing (see Figure 2-2 on page 2-4 ) over the shoulder
head bolts and slide the MK1200 to the left and down to secure in place. See Wall Mounting Kit on page 2-4
and Mounting Directions on page 2-5 .
5.
Screw one 8-32 pan head locking screw into the pole mount bracket bottom left tab. See Figure 2-5 on page
2-6 . Hand tighten the locking screw, or for additional security use a nylon locknut (not included), to prevent
removal of the device.
6.
Proceed to Connecting the MK1200 on page 2-7 .
Figure 2-5
Pole Mount Kit
Pole Mount Bracket:
Locking Screw
Connector/Port Cover
Shoulder Screws (4)