Motorola MK1200, Product Reference Manual

Page: 50 / 232

3 - 4 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Rebooting the MK1200
After downloading the mkconfig.reg file, perform a remote or local cold boot to apply the new settings.
Remote Boot
After loading the configuration file onto the MK1200 using the wired or wireless Ethernet connection, use the RDM
to send a command over the network to initiate a remote cold boot of the MK1200.
1.
Select the MK1200 to cold boot from the list box in the
Remote Device Manager
screen.
2.
From the RDM main toolbar, select
Actions > Cold Boot
. Allow approximately one minute for the MK1200 to
reboot and reconnect, then select
View > Refresh
to verify the device rebooted successfully.
Local Boot
To manually cold boot the MK1200, which enables the settings within the mkconfig.reg file to load, press and hold
buttons
B and C on the MK1200 (see Figure 1-3 on page 1-5 ) until the display goes blank (typically 15 seconds),
then release the buttons.
Alternatively, to cold boot the MK1200, select the reboot option from the System Menu
File
menu.