Motorola MK1200 Product Reference Manual Download

Page: 72 / 232

3 - 26 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide

To change the way the date appears, tap the

Date

tab and make the changes.

Figure 3-16

Regional Settings Properties Screen - Date Tab

Tap

Start > Programs > Save Configuration

to save the new settings in the MK1200 configuration (mkconfig.reg)

file.

Memory Allocation

To change memory allocation settings:

Tap

Start > Settings > Control Panel > System > Memory

Figure 3-17

System Properties Screen - Memory Tab

On the

Memory

tab, adjust the memory allocation as desired using the slider.

Tap

OK.

NOTE

Changing these settings using the Control Panel does not persist them through cold boot cycles. To set
allocation to persist through cold boot cycles, or for more information on this topic, see

Memory

Management on page 7-10

Summary of Contents for MK1200









































































































































































































































Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands

Motorola MK1200, Product Reference Manual

Search results

Summary of Contents for MK1200

Reviews:

Related manuals for MK1200

Brands by name

Popular brands