Motorola Confidential Proprietary
A920/A925
Handset Test Commands
2 - 6
Preliminary
0000b (0x00)
0
parse error (no data follows): invalid data length for command
0001b (0x01)
1
parse error (no data follows): inadequate security level for command/parameter
0010b (0x02)
2
parser error (no data follows): command/parameter not supported for current protocol
(CDMA, GSM, TDMA)
0011b (0x03)
3
parse error (no data follows): command/parameter not supported for current mode
(normal, test mode, handset test mode)
0100b (0x04)
4
parse error (no data follows): unsupported/invalid opcode
0101b (0x05)
5
parse error (no data follows): unsupported/invalid parameter for opcode
0110b (0x06)
6
command response: generic success (no data follows)
0111b (0x07)
7
command response: generic failure (no data follows)
1000b (0x08)
8
command response: data follows
1001b (0x09)
9
unsolicited/multiple response: data follows (sequence tag is 0)
1010b (0x0A)
10
error: couldn’t allocate memory
1011b (0x0B)
11
error: internal task error
1100b (0x0C)
12
error: Test Command task timed out waiting for response from another SW component
1101b (0x0D)
13
CDMA: parse error (no data follows): command/parameter not supported for current sub-
mode TDMA: command not supported in current Call Stack Test Mode
1110b (0x0E)
14
error: length specified in command header greater than length received by transport
layer
1111b (0x0F)
15
error: irrecoverable error; phone state has been lost. Phone is being powered down
Opcode
(Hexadecimal)
Opcode
(Decimal)
Response Field Definition
Table 2. Standard Response Codes
