Motorhispania MH7 Naked, Workshop Manual

Page: 64 / 138

72
5 ELECTRICAL SYSTEM
Obs. 8-3: Regulation: from 1.000mm to 2.500mm
with step of 1mm. Setting a value over 2.500mm,
will cause the circumference set to default value
(1.845mm)
Obs. 8-4: Once inside the regulation menu:
• If 20 sec. will pass without the button mode is pushed, or
• If the vehicle is turned on (speed>0), or
• If the key is turned OFF
The system will be automatically taken to the stan-
dard operating mode and the modifi cations possibly pro-
duced will be lost.
8.3.2. Modifi cation wheel revolution impulses
This parameter expresses the number of impulses
that the speed sensor sends to the instrumentation
for every wheel revolution.
The selected value is shown blinking as in picture
8-4 (f=1Hz, Duty=50%).
Pressure of Set button allows the unit increase im-
pulses, from a minimum of 1 to a maximum of 12.
Pressure of Mode button allows the value confi r-
mation and the passage to the following screen.
The information concerning the number of im-
pulses which the instrumentation receives from the
speed sensor is saved in memory.
Obs. 8-5: Impulses can also NOT have the same dis-
tance.
Obs. 8-6: Once inside the regulation menu:
• If 20 sec. will pass without the button mode is pushed, or
• If the vehicle is turned on (speed>0), or
• If the key is turned OFF
The system will be automatically taken to the stan-
dard operating mode and the modifi cations possibly
produced will be lost
8.3.3. Modifi cation engine revolution impulses
This parameter expresses the number of impul-
ses that the vehicle sends to the instrumentation
for every engine tree revolution.
The chosen value is shown blinking (with f=1Hz,
Duty=50%).
Visualization on the display, picture 8-5, has
“RPM” on digit 10÷12.
Pressure of Set button allows the unit increase of
engine turns impulses, from a minimum of 1 to
a maximum of 8.
Pressure of Mode button allows the value confi rmation
and the exit from Set-up menu.
Picture 8-4: wheel turns
regulation
Picture 8-5: engine turns regulation