61
5
DASHBOARD CONFIGURATION OR
ADJUSTMENT
• The instrument panel has two adjustment buttons:
SET(1) button and MODE(2) button.
• Aim of the buttons is:
Allow functions scrolling.
Regulation of the clock.
Set to zero the TD, AVE , LAP and MAX values.
Entering the Set-up menu to modify the wheel cir-
cumference value, the measurement unit value of dis-
tance, the number of impulses for every turn of the
wheel and of the engine, and fi nally to associate the
graphic bar to the selected information.
The function scrolling is always possible (it means the
passage from one function to the following one) with the
vehicle stopped or not. To update the instrumentation
with the new function, it’s enough briefl y pushing the bu-
tton (tmin = 1 sec.), when it will be left the display will
show the new function.
The setting to zero of TD, of the chronometer, of the
average and max. speed can be done both with the vehi-
cle stopped or in movement as described in the previous
paragraphs. Clock regulation is possible only when vehicle
is stopped.
The entering in the Set-up menu is possible only when the
vehicle is stopped by pushing at the same time the two
buttons for about 4 seconds; the back-up of all data will
be done only when the Mode and Set buttons (it depends
on selected set up chosen) will allow the exit from the
Set-up menu.
5
ELECTRICAL SYSTEM
Summary of Contents for MH7 Naked
Page 1: ......
Page 138: ...Created by www ciandisseny com...
