128
6
ENGINE
RE-FITTING THE JETS, FLOAT AND NEEDLE VALVE
• Fit the jet spray nozzle (1).
• Fit the main jet (2).
• Fit the idle adjuster screw (3).
• Position the needle valve (4) on the tongue of the fl oat (5).
• Install the fl oat on the carburettor body while fi tting the
needle valve into its recess.
• Fit the pin (6) into the fl oat.
• Fit the paper gasket.
• Fit teh fl oat chamber.
• Fit and tighten the 4 screws of teh fl oat chamber.
• Re-install all the other components and, if necessary,
when starting the engine, readjust according to the va-
lues indicated on the technical data card.
Summary of Contents for MH7 Naked
Page 1: ......
Page 138: ...Created by www ciandisseny com...
