Motorhispania MH7 Naked, Workshop Manual

Page: 29 / 138

36
REAR WHEEL
REMOVAL
• Loosen the tensioner locking nut (A).
• Tighten the bolt (B) right down.
• Remove the 2 nuts (C) from the shaft.
• Remove the 2 tensioners (D).
• Push the wheel forwards.
• Remove the chain (E).
• Pull the shaft to free the brake calliper - support.
• Pull the shaft to free the separator, the wheel and the
other
separator.
C A B
E
N.B.
PAY MAXIMUM ATTENTION TO THE POSITION OF
THESEPARATING BUSHES.
DO NOT APPLY THE BRAKE PEDAL DURING THIS
OPERATION. IF YOU DO SO, YOU WILL NEED TO
DRAIN THE BRAKE FLUID AND OPEN THE PADS TO
REINSERT THE BRAKE DISK WHEN REFITTING THE
WHEEL.
WARNING
-PLACE THE MACHINE ON A FLAT SURFACE.
-STAND THE MACHINE ON A SUITABLE SUPPORT, IN
SUCH A WAY THAT THE REAR WHEEL IS OFF THE
GROUND.
4 CHASSIS
Set spanner
Allen key
D