Motorhispania MH7 Naked, Workshop Manual

Page: 103 / 138

112
6 ENGINE
• Remove the 10 screws from the LH crankcase, 2 of
which are located on the RH crankcase.
• Remove the 2 nuts that secure the engine to the
fi xture.
• Remove the RH half crankcase and the 2 centering
pins.
• Fit the 2 nuts that secure the engine to the fi xture.
• Remove the balance shaft (12).
• Remove the 2 pins (13) of the shift forks.
• Remove the selector cylinder. (14)
• Remove the shift forks.
• Remove at the same time the input shaft (15) and se-
condary shaft (16) assembly.
• Remove the clutch push rod of the input shaft.
REMOVAL OF THE CRANKSHAFT
• Fit protective cap P/N 69098 to the end of the
crank assembly.