12
Recommended Separation Distances between
portable and mobile RF communications equipment
and the MOTOmed viva 2.
The MOTOmed viva 2 is supposed to be operated in an electromagnetic
environment where the RF interference is controlled. The customer or
user of the MOTOmed viva 2 can help avoid electromagnetic
interference by keeping the separation distances between portable
and mobile RF communications equipment (transmitters) and the
MOTOmed viva 2 – which depends on the performance of the
communication device as described below.
For transmitters rated at a maximum output power not listed above, the separation distance
d
in meters (m) can be
estimated using the equation in the corresponding column, where
P
is the maximum output power rating of the
transmitter in watts (W) according to the specifications of the manufacturer.
Note 1: At 80 MHz and 800 MHz the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
150 kHz to 80 MHz
d = 1,17 P
0,12
0,37
1,17
3,70
11,70
80 MHz to 800 MHz
d = 0,35 P
0,04
0,11
0,35
1,11
3,50
800 MHz to 2,5 GHz
d = 0,7 P
0,07
0,22
0,70
2,21
7,00
Separation distance in relation to the frequency of transmitter
in meter
Rated maximum
output power
of transmitter
W
0,01
0,1
1
10
100
EMC INFORMATION
89
7133W200n_GB_0508 06.06.2008 14:25 Uhr Seite 91
Summary of Contents for viva2
