MOTOmed viva2, Instruction Manual

Page: 35 / 98

4
Change of SymmetryTraining display
To change the SymmetryTraining display press the following buttons:
Button “extras“ (1.), button “extras“ (2.), again button “extras“ (3.) and
finally the button “symmetry display“ (4.).
Now you may choose between the one bar graph and two bar graph (5.).
By pressing the button “ “ you can close the program and save this
setting.
Continuously changing display
A small pin on the top of the display indicates that you are holding
the display is freezed. If you wish to go back to the continuously
changing display, just press the button “change display”. Now various
information will appear on the display successively.
5.
one
bar
2:18 min
two
bars
symmetry display
two bars
set ref.
point
two
bars
one
bar
2:25 min
duration extras
You are cycling yourself
gear 5
heavy light direction hold display
shift gear
motor
power Spasm
Control starting
parameters
infor-
mation
extras
4:54 min
extras 1 2 3
adjust
contrast
adjust
volume
duration
display
extras
5:34 min
extras 1 2 3
language
options
symmetry
display
softkey
position
back+forth
program
extras
6:11 min
extras 1 2 3
max
rpm
symmetry
display
4.
Fig. 28
Fig. 29
1. 2. 3.
extras extras extras
OPERATION 33
7133W200n_GB_0508 06.06.2008 14:25 Uhr Seite 35