background image

SAFETY PRECAUTIONS

82

environments. The MOTOmed viva 2 must never be opened by any
unqualified person and metal objects must never be inserted. 

The MOTOmed viva 2 must never be opened by any unqualified 
person and metal objects must never be inserted. 

Portable or mobile communication devices, like mobile phones or
amateur radio stations, can influence the functioning of the
MOTOmed viva 2. Such devices carry the symbol illustrated on the 
left side and can thus be recognized. 

If the motor is on overload, please follow the instructions 
“overheating.” When cycling actively in small gears, the function
“ServoCycling” can be recognized easily. This means that through the
support of the motor the speed of the MOTOmed viva 2 can be 
significantly increased by applying only little muscle strength. Thus,
the effect of the muscle force applied is enforced by the motor. One-
sided training, either with only one leg/arm or with big differences in
weight of the limbs should be done only under supervision of a 
person in charge and only in a high gear. In case of an amputated leg
a

counter weight (item no. 535)

is required.

The MOTOmed viva 2 is suitable only for therapeutic use. The values
displayed are not suitable for diagnostic purposes. 

In order to avoid overheating of the casing you must not expose 
the MOTOmed viva 2 to long-term direct solar radiation. Further you
must not block actively against the passive motion as this could
damage the motor and the electronics.

The MOTOmed viva 2 must not come into contact with water or
steam. If an object or liquid gets into the MOTOmed viva 2 you have
to have it checked by qualified personnel before you can continue to
use it.

see page 67

see page 75

7133W200n_GB_0508  06.06.2008  14:25 Uhr  Seite 84

Summary of Contents for viva2



































































































Reviews: