MOTOmed viva2, Instruction Manual

Page: 27 / 98

see page 53
Settings
Leg insertion aid (insertion and securing of legs)
Before you start the training, you have to place your feet into the
foot shells and fix them with the Velcro straps. The leg insertion aid
of the MOTOmed viva 2 offers the possibility to bring the foot shells
into a suitable position to help you inserting your legs more comfor-
tably. Please press the blue button (leg insertion aid).
Press button “pedals forwards“ or “pedals backwards“ until the first foot
shell is at the desired position. As soon as you stop pressing the button
the pedals stop moving. Now you can insert and fix your first leg with
the Velcro straps or
self-operating foot holders (item no. 506) in the
foot shell. After that you repeat this procedure with your other leg.
The training starts as soon as you press “start/stop“.
Important: Only
start your training when both legs are inserted and fixed.
Suggestion: If your legs are not equally flexible, step in first with the
leg that is less flexible than the other.
For some types of wheelchairs it may be necessary to remove the
foot plate or to swivel it aside in order to allow sufficient access to
the MOTOmed viva 2.
However, if you decide not to train, the MOTOmed viva 2 goes into
stand-by mode after a few minutes.
pedals
backwards
Easier leg insertion:
Keep button “pedals forwards“ or
“pedals backwards“ pressed
until pedals are in a suitable
position for leg insertion.
pedals
forwards
pedals
backwards
pedals
forwards
4
Fig. 16
OPERATION 25
7133W200n_GB_0508 06.06.2008 14:24 Uhr Seite 27