MOTO GUZZI CALIFORNIA EV 1997-2000, Workshop Manual

Page: 238 / 288

A
B
C
D
E
F
G
H
I
L
M
N
O
P
26 G
EARBOX
Secondary shaft gears
They shall not be extremely worn out on the toothing and
on the front engaging notches. The surfaces touching the
teeth shall be smooth, not dented nor damaged, otherwise
replace the gears.
Roller bearing locking nut on the secondary shaft
Check that the thread is in good condition, not dented
nor damaged, otherwise replace the nut.
Roller bearing cage bushings on 1
st
-2
nd
-3
rd
-4
th
-speed
gears on the secondary shaft
Check that the working surface of the roller bearing cages
is smooth, not dented nor scored, otherwise replace the
bushings.
Roller bearing cages on 1
st
-2
nd
-3
rd
-4
th
-speed gears on
the secondary shaft
Check that the cage rollers are in perfect condition,
otherwise replace the cages.
Engaging gear sleeve control forks
Check that the fork working surfaces are smooth and not
so worn out to loose their temper characteristics, and
that the retaining keys working in the drum splines are
not worn out, otherwise replace the forks.
Engaging gear splined drum
Check that the splines in which the retaining keys of
engaging gear sleeve control forks slide are not extremely
damaged nor worn out, otherwise replace the splined
drum.
Splined drum pins
Check that they are straight and not worn out, otherwise
replace them.
Drum holder rods and gearbox control forks
Check that the rods are perfectly straight and not worn
out where the engaging gear forks work, otherwise
replace the rods.
Clutch shaft
Check that splines, threads and sector slots are not worn
out nor dented, otherwise replace the shaft.
Internal body locking ring nut on the clutch shaft
Check that the thread is intact, otherwise replace the ring
nut.
Safety washer for locking ring nut of the clutch shaft
fixed body
Check that the washer ribs are in good conditions
otherwise replace the washer.