MOTO GUZZI CALIFORNIA EV 1997-2000, Workshop Manual

Page: 209 / 288

A
B
C
D
E
F
G
H
I
L
M
N
O
P
52 E
NGINE
Clutch springs “1”
Check that the springs have not lost their elasticity and
are not deformed:
• Springs compressed to 20 mm must give a load of
21 ÷ 21.5 Kg ;
• Springs compressed to 17 mm must give a load of
28.7 ÷ 29.7 Kg;
Spring pressure plate “2”
Check that the disk hole, where the control retainer
operates, does not show signs of wear, and that the
resting surfaces for the driven disk are perfectly flat.
Check that the toothing inside the fly wheel is in perfect
condition.
Driven disks “3”
Check that the coupling surfaces with the driven disks
are completely smooth and flat and that the external
toothing which works inside the flywheel is not ruined,
otherwise replace the disk.
Toothed crown for ignition “15”
Check that the coupling surface with the driven disk is
perfectly smooth and flat.
Also check that the toothing, where the starter motor
pinon works, is not ginned or damaged, otherwise replace
it.
Clutch internal body “12”
Check that the teeth do not show signs of impression in
the area in contact with the disks.
Reassembly:
B
A
C
D
E
F
G
H
I
L
M
N
O
P