MOTO GUZZI CALIFORNIA EV 1997-2000, Workshop Manual

Page: 128 / 288

A
B
C
D
E
F
G
H
I
L
M
N
O
P
2 C
ONTROLS
B
A
C
E
C
A
B
D
D
E
1 CLUTCH AND FRONT BRAKE CONTROL
Removal of front brake lever with master cylinder:
• Drain the hydraulic system thoroughly, as described
in chapter 2, section D;
• Detach the connections “A” for the micro-switch “B”
• Unscrew the hollow screw “C” fastening the tube to
the pump;
• Remove the tube and the gaskets from the pump;
• Remove the rear-view mirror;
• Unscrew the two screws “D” which fasten the pump to
the half-handlebar using a jumper “E”;
• Remove the pump together with the tank and lever;
Reassembly:
• Fit the pump onto the half-handlebar by tightening the
two fastening screws;
• Reconnect the tube to the pump by tightening the
hollow screw to the torque prescribed in the table in
chapter 4, section B;
• Connect the electric wirings to the micro-switch on
the master cylinder;
• Assemble the mirror;
• Fill the system with the prescribed hydraulic system
fluid.
Removal of front clutch lever:
• Remove the rear-view mirror;
• Move the protective cover “A” and disconnect the
CHOKE transmission “B” and the clutch “C” from their
respective lever;
• Unscrew the 2 screws “D” fixing the clutch lever
mounting to the handlebar using a U-bolt “E”.