10
2.5 Remaining risks
Folge
Remaining risks can occur under the following
circumstances:
• If the system is not used as intended, if the system is
modified or altered improperly.
• If the system is operated improperly by untrained or
unskilled personnel.
• If the system is cleaned, serviced or maintained
improperly and/or if non-compliant with scheduled
service intervals.
The following remaining risks should also be taken into
consideration:
• Electrical current during installation or cleaning can
lead to injury or death. Work on the electrical system
must only be carried out by qualified electricians while
the system is disconnected!
• Working in close quarters poses the risk of bumps and
crush injuries and cuts from sharp corners and edges.
• Improper handling can damage the bodywork,
components or cables.
• Welding work may not be carried out on tank
components!
• Failure to comply with the installation guidelines and
technical specifications of the vehicle and
manufacturer.
• Tree branches or other objects above the cameras are
not recorded! In this case, the use of the rear-view
mirrors or the assistance of a banksman is mandatory!
• The higher an object from the ground, the more this
object is displayed on the monitor as bending outward.
This representation, which is not true to scale, must be
taken into account by the driver.
• The display in the monitor is
true to scale
only on the
footprint of the vehicle and only in the
undistorted
mode.
• The image quality decreases with corresponding
environmental conditions: In this case, a banksman
must be available during the manoeuvring of the
vehicle.
• However, the reality may slightly deviate from this
composed image. Objects outside the image cones are
not captured.
2.6 Display of warnings
In these instructions, warnings are shown in the form of
warning pictograms. The warnings must be observed in
order to avoid accidents, injury or damage to property.
The warnings are introduced by keywords which express
the extent of the risk.
The following key words and symbols are used within these
instructions.
This is the general hazard symbol.
It warns of hazards to life or potential injury.
DANGER
The keyword
DANGER
is used for an immediate risk.
Failure to observe will lead to serious injury or death.
WARNING
The keyword
WARNING
is used for a potential risk.
Failure to observe could lead to serious injury or death.
CAUTION
The keyword
CAUTION
is used for a potential risk.
Failure to observe could lead to minor to moderate
injuries.
CAREFUL
The keyword
CAREFUL
indicates possible damage to
property. Failure to observe could lead to damage to the
product.
