Morgana AutoCreaser Pro 385 Instruction Manual Download Page 72

Page: 72 / 83

Pro 385 Error Codes (Continued)

Remove stack of paper

Remove paper from the stack support.

After having removed the paper, the

green checkmark button will appear,

press it to clear this error.

Interrupted initialisation

If initialisation is interrupted (e.g. a

cover is opened), the “interrupted

initialisation” screen will appear.

Press the green checkmark button

to clear this error and continue the

initialisation.

DSD error

This error message appears if a

double sheet feed is detected.

Remove the misfed sheets and press

the checkmark button to clear this

error.

Press the arrow button to move the

stack support down.

NOTE:

When feeding laminated paper, the

DSD sensor should be turned off to

avoid getting this error.

See the “Expert user options” section

in this manual for how to turn the DSD

sensor off.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920

Summary of Contents for AutoCreaser Pro 385




















































































Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands

Morgana AutoCreaser Pro 385, Instruction Manual

Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands