Morgana AutoCreaser Pro 385 Instruction Manual Download Page 70

Page: 70 / 83

Pro 385 Error Codes

General Error Code description: “mechanical error”

General Error Code description: “too long”

This error appears when there is

a mechanical error in one of the

modules of the Pro 385.

Press the checkmark button to clear

this error.

If pressing the button does not clear

the error, contact a certified service

technician.

This error appears when it takes too

long for a sheet to cover the distance

between two sensors. The line

indicates in which module the error

has occurred.

Remove the sheet and press the

checkmark button to clear this error.

Press the arrow button to move the

stack support down.

General Error Code description: “misfeed”

This error appears when a sheet

has been misfed. The line indicates

in which module the misfeed has

occurred.

Remove the misfed sheet(s) and press

the checkmark button to clear this

error.

Press the arrow button to move the

stack support down.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920

Summary of Contents for AutoCreaser Pro 385




















































































Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands

Morgana AutoCreaser Pro 385, Instruction Manual

Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands