52
2
You must set the crease pressure correctly to make a good crease. Some of the problems
you can see when you do not set the pressure correctly are shown in the table below:
Low Crease Pressure
High Crease Pressure
Crease Pressure Not The Same at Both Sides
-The paper can crack when it is folded
-The paper can fold across the crease, so
the document will not be square
-The creaser mechanism can stall
-The blade set can cut the paper
Always make sure that the crease pressure is set correctly. Set the crease pressure prior
to running the machine, when creases are not as desired, and when replacing crease
blade sets.
Loading Paper
Crease Pressure
Job Preparation
1
Choose paper size in Graphical User Interface (Quick Start or Manual selection)
2
Open Feeder Top Cover
3
Load Paper
NOTE:
Paper Size parameters must be chosen prior to loading paper. After choosing paper size,
the Backstop and Side Lay are shifted automatically to the proper locations.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
