25
1
Setting the Crease Tilt Knob (continued)
DigiFold Pro 385 Knob Adjustment Procedure - Blade 1
NOTE:
Wrong crease positions are
marked in red, correct crease
position is marked in green.
Blade 1 knob
14
Rotate the right knob
counterclockwise to loosen it.
15
Move the knob slightly, either to
the left or to the right depending on
whether the crease is tilted either to
the right or to the left.
16
Rotate the knob clockwise to
secure it.
17
Run a test sheet to check if the
creases is now perpendicular.
18
Repeat steps 14 to 17 if necessary.
10
From the GUI, select a one-crease
custom fold (see section 2) and
load paper.
11
Turn the folding option off (see
section 2).
12
Run a test sheet (see section 2).
13
If the crease is not in the correct
position (see figure 3), adjustment
is needed.
Feed direction
figure 3
Blade 1
