Morgana AutoCreaser Pro 385 Instruction Manual Download Page 58

Page: 58 / 83

Settings in production

This is only for certified service

technicians. Please contact a

certified service technician if service

is required.

Settings in production

Tools menu

Press the marked button to enter this

sub-menu.

This sub-menu allows the user to

move rollers and knives to clear

paper jams.

Press the left and right arrow buttons

to move the rollers in the desired

direction.

Press the “play” button to move the

knives back and forth. Press the

“stop” button to stop the knives.

Tools menu

Press the

left and right circular

arrows in the bottom left corner to

move the knives ma

nually either to

the left or to the right.

The user can also use this sub-menu

to set blades to Top Dead Centre

position, by pressing the up arrows

on the bottom of the screen. See the

“Setting Crease Pressure” section in

this manual for further details.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920

Summary of Contents for AutoCreaser Pro 385




















































































Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands

Morgana AutoCreaser Pro 385, Instruction Manual

Search results

Summary of Contents for AutoCreaser Pro 385

Reviews:

Related manuals for AutoCreaser Pro 385

Brands by name

Popular brands