10
58. Position the trim panel (2) over the retaining tabs (1) and slide
into place fully.
59. Install the screws (3).
60. Install the liftgate scuffpad (2).
61. Position the shoulder belt through the slot in the trim.
62. Position the trim (2) in place on the D-pillar and anchor (3).
63. Seat the retaining clips fully and install the screw (1).
64. Install the upper rear headliner trim (3).
65. Connect negative battery cable.
SDARS VEHICLE CONFIGURATION
Vehicle VIN must be updated with the sales code of the added accessory in order to enable system functionality.Using
the DealerCONNECT website and a scantool, complete the procedure below.
4/1/2008
K6860274 Rev. 1
