5
18. Determine which side of the vehicle the headliner will be
removed from and disconnect the seat belt turning loop and
height adjuster (3) from the upper roof rail (1) on that side of
the vehicle as follows:
• Remove the two screws (2) that secure the seat belt turning
loop and height adjuster bracket (3) to the upper roof rail (1)
and position it aside.
Club Cab, With Rear Jumper Seats
19. Adjust the front seat to its most forward position.
20. Unsnap the trim cover (4) from the rear seat belt turning loop
(3).
21. Remove the screw (5) that secures the seat belt turning loop
to the upper C-pillar (1).
22. Remove the seat belt turning loop from the C-pillar.
23. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the lower C-pillar trim panel (7) to
the C-pillar (1).
24. Remove the screw (6) that secures the lower anchor to the
fl
oor panel near the base of the C-pillar.
25. Remove the seat belt (3) from the lower C-pillar trim panel
through the slots provided and remove the trim panel.
CAUTION: Keep the inner bottom end of the upper C-pillar trim
panel away from the cab back trim panel when removing the
upper C-pillar trim panel to prevent scratching the back trim
panel.
26. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the upper C-pillar trim panel (2) to
the C-pillar. Pull the outer bottom end of the trim panel outward toward the door opening so that the inner bottom
end of the trim panel doesn't touch the cab back trim panel. While maintaining the outward pressure, pull the trim
panel away from the C-pillar and remove the trim panel.
Quad Cab
27. Adjust the front seat to its most forward position.
28. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs (2) that secure the rear door sill scuff plate (1)
to the retaining clips in the rear door sill and remove the scuff
plate.
4/1/2008
K6860274 Rev. 1
