10
56. Starting on the inside, slide the moon roof trim in to the slot
and push up to engage clips.
57. Position the quarter trim panel in the vehicle.
58. If equipped, connect the wire harness connector to the power
outlet.
59. Position the flange on the quarter trim panel into the seal ditch
and secure the bottom clip first and then the middle clip.
60. Align the two fastener holes in the quarter trim panel with
the two fastener holes in the quarter panel and engage the
retaining tabs that secure the quarter trim panel to the quarter
panel.
61. Install the two screws and the d-ring that secure the quarter
trim panel to the quarter panel.
62. Position the load floor in the vehicle.
63. Install the two nuts that secure the load floor to the floor panel.
4/1/2008
K6860274 Rev. 1
