2
8. Remove the driver side header trim panel.
9. Remove the screws (3).
10. Slide the trim panel (2) off the retaining tabs (1) and remove.
11. Remove the driver side C-pillar trim panel.
12. Unsnap the upper edge of the trim cover (3) from the second
row outboard seat belt turning loop (1) and disengage the tab
(2) on the lower edge of the cover to access the turning loop
screw.
13. Remove the screw (3) that secures the seat belt turning loop
(4) to the height ad uster (1) on the upper C-pillar (5).
4/1/2008
K6860274 Rev. 1
