1
SDARS ANTENNA
COMMANDER
PROCEDURE STEPS:
1.
Disconnect and Isolate the negative battery cable.
2.
Using Trim Stick C-4755, or equivalent, release the retaining
clips that secure the header trim molding (1) in the liftgate
opening and remove.
3.
Remove the push pins from the headliner at the rear of the
vehicle.
4.
Using Trim Stick C-4755, or equivalent, disengage the
retaining tabs that secure the liftgate scuff plate to the liftgate
door sill and remove the scuff plate (1).
NOTE: Load
oor shown, jack tray similar.
4/1/2008
K6860274 Rev. 1
