12
86. Position the inboard (1) and outboard (3) outer seat
belt retractor cover halves around the seat belt (2)
with the top of each half angled toward the other
and engage the snaps that secure the two halves
together. Then, close the cover around the seat belt.
87. Using hand pressure, push the retractor cover (1)
downward over the retractor (3) far enough to engage
the two locator pins in the top of the inboard cover
half with the locator holes in the top of the retractor.
88. Install the two plastic push-pin retainers (2) that secure
the retractor cover to the retractor.
Quad Cab
4/1/2008
K6860274 Rev. 1