Moore Industries TDZ3 User Manual Download Page 75

Page: 75 / 140

www.miinet.com

Moore Industries-International, Inc.

- 75 -

User’s Manual

238-741-00K

May 2019

Programmable Smart HART Temperature Transmitter

THZ

/ TDZ

SECTION 5

Section 5 -

Configuration using FDT/DTM

Software

Before reading this section on the FDT/DTM configuration, please read the Configuration

Overview at the beginning of Section 4 for general information on configuring the TDZ

THZ

This section provides information on configuring the TDZ

THZ

using a PC with PACTware

(an FDT frame application). For users who already have an FDT Frame Application, all the

following information is still relevant except for the PACTware installation. For more information

on FDT/DTM please refer to www.fdtgroup.org.

FDT Frame Application

Moore Industries has always provided manufacturer-specific programs to operate our field

instruments to the full extent. TDZ

THZ

will require the use of an FDT frame application, which

allows configuration and adjustment of any and all field instruments ,which have a DTM. For

users who do not already have an FDT frame application, Moore Industries provides PACTware.

An FDT frame application, such as PACTware, is a PC program which interfaces with individual

software modules for instrument operation. This interface is regarded as the FDT; the individual

software modules for instrument adjustment are called DTMs (Device Type Manager) . This

configuration makes user-friendly adjustments possible because the interface for instrument

adjustment is optimally adapted to each instrument.

Furthermore, you can communicate with an FDT frame application not only via HART but also

via any standard field bus system. Moore Industries provides a proprietary serial communication

DTM named MISP, which allows faster device configuration using our USB communication

cable. The MISP DTM will be provided in addition to the TDZ

THZ

Device DTM. In the FDT

frame application, these individual instrument DTMs and communication DTMs are installed as

required.

FDT/DTM Software Installation

In order to get started you will need to either install the PACTware software and DTMs or just

install the DTMs (if you already have an FDT frame application installed). All the files you need

can be found on our website www.miinet.com.

Summary of Contents for TDZ3













































































































































Search results

Summary of Contents for TDZ3

Reviews:

Related manuals for TDZ3

Brands by name

Popular brands

Moore Industries TDZ3, User Manual

Search results

Summary of Contents for TDZ3

Reviews:

Related manuals for TDZ3

Brands by name

Popular brands